Información Técnica Collar de Eje in Shell
grey block
 

Datos de Prueba de Carga Axial

 

Resistencia a carga axial

*ATENCIÓN: Estos valores son del momento le la falla y son únicametne orientativos!

Collarines Imperial

Clave de producto Orificio Tornillo Par de Apriete (lb-in) Deslizamiento
sobre el eje* (lb)
CL-4-F 0.250 #4-40 15 200 (HARD)
CL-4-SS 0.250 #4-40 8 150 (HARD)
SC-4-F 0.250 #8-32 15 350 (SOFT)
SC-4-SS 0.250 #8-32 12 200 (SOFT)
CL-6-F 0.375 #6-32 28 600 (HARD)
CL-6-SS 0.375 #6-32 15 200 (HARD)
CL-8-A 0.500 #8-32 49 1200 (SOFT)
CL-8-F 0.500 #8-32 49 1000 (HARD)
CL-8-SS 0.500 #8-32 28 600 (HARD)
SC-8-F 0.500 1/4-20 75 950 (SOFT)
SC-8-SS 0.500 1/4-20 60 500 (SOFT)
SP-8-A 0.500 #8-32 49 1250 (SOFT)
SP-8-SS 0.500 #8-32 28 900 (HARD)
CL-10-F 0.625 #10-32 76 2400 (SOFT)
CL-10-SS 0.625 #10-32 45 800 (SOFT)
SC-10-F 0.625 5/16-18 165 1500 (SOFT)
SC-10-SS 0.625 5/16-18 130 900 (SOFT)
CL-12-A 0.750 1/4-28 170 3700 (HARD)
CL-12-F 0.750 1/4-28 170 3500 (HARD)
CL-12-SS 0.750 1/4-28 110 1400 (SOFT)
SC-12-A 0.750 5/16-18 165 1400 (SOFT)
SC-12-F 0.750 5/16-18 165 1600 (SOFT)
SC-12-SS 0.750 5/16-18 130 1100 (SOFT)
SP-12-SS 0.750 1/4-28 110 1600 (SOFT)
SP-16-F 1.000 1/4-28 170 3000 (HARD)
SP-16-SS 1.000 1/4-28 110 1700 (HARD)
CL-24-F 1.500 1/4-28 170 2900 (HARD)
CL-24-SS 1.500 1/4-28 110 1900 (HARD)
SC-24-F 1.500 3/8-16 290 2100 (SOFT)
SC-24-SS 1.500 3/8-16 230 1200 (SOFT)
CL-32-F 2.000 5/16-24 325 8000 (HARD)
CL-32-SS 2.000 5/16-24 190 2700 (HARD)
SC-32-F 2.000 1/2-13 620 2900 (SOFT)
SC-32-SS 2.000 1/2-13 500 1200 (HARD)
CL-48-F 3.000 3/8-24 570 8000 (SOFT)
CL-48-SS 3.000 3/8-24 345 3700 (HARD)
SC-48-F 3.000 1/2-13 620 3100 (SOFT)
SC-48-SS 3.000 1/2-13 500 1800 (SOFT)

Collarines Métricos

Clave de producto Orificio Tornillo Par de Apriete (Nm) Deslizamiento
sobre el eje* (N)
MCL-8-A 8mm M3 2,1 2650
MSP-8-A 8mm M3 2,1 3200
MCL-8-F 8mm M3 2,1 4450
MSP-8-F 8mm M3 2,1 4800
MCL-8-SS 8mm M3 1,1 1000
MSP-8-SS 8mm M3 1,1 1150
MCL-12-A 12mm M4 4,6 5950
MSP-12-A 12mm M4 4,6 6200
MCL-12-F 12mm M4 4,6 6450
MSP-12-F 12mm M4 4,6 7150
MCL-12-SS 12mm M4 2,5 1350
MSP-12-SS 12mm M4 2,5 2000
MCL-35-A 25mm M6 16,0 15800
MSP-25-A 25mm M6 16,0 16450
MCL-25-F 25mm M6 16,0 18700
MSP-25-F 25mm M6 16,0 19100
MCL-25-SS 25mm M6 9,6 5300
MSP-25-SS 25mm M6 9,6 6150
MCL-50-A 50mm M8 39,0 27000
MSP-50-A 50mm M8 39,0 28000
MCL-50-F 50mm M8 39,0 40000
MSP-50-F 50mm M8 39,0 40850
MCL-50-SS 50mm M8 23,0 10000
MSP-50-SS 50mm M8 23,0 11450

LIABILITY DISCLAIMER

The information chart presented on this page are typical values under certain test conditions and are not a guarantee of average values nor a guarantee of maximum or minimum values under all conditions. Thrust values shown are FAILURE MODE. They are shown solely for the reader to utilize appropriate testing equipment to make his/her own evaluation, and are not intended by Ruland Manufacturing Co., Inc., as warranties, either express or implied, of fitness for a given purpose. A full disclaimer and limited warranty can also be found on this site.

 
Catálogos PDF
Soporte para su Aplicación
Archivos CAD
Artículos
Guía del Acoplamiento
Instrucciones de Instalación
Datos de Carga Axial
Materiales
Acabado Superficial
Tornillos
Información sobre ROHS
Información sobre REACH
Garantía